Register
Client Area

iWriteGigs

support@iwritegigs.com
Facebook-f
Register
Client Area

Fresh Grad Lands Job as Real Estate Agent With Help from Professional Writers

People go to websites to get the information they desperately need.  They could be looking for an answer to a nagging question.  They might be looking for help in completing an important task.  For recent graduates, they might be looking for ways on how to prepare a comprehensive resume that can capture the attention of the hiring manager

Manush is a recent graduate from a prestigious university in California who is looking for a job opportunity as a real estate agent.  While he already has samples provided by his friends, he still feels something lacking in his resume.  Specifically, the he believes that his professional objective statement lacks focus and clarity. 

Thus, he sought our assistance in improving editing and proofreading his resume. 

In revising his resume, iwritegigs highlighted his soft skills such as his communication skills, ability to negotiate, patience and tactfulness.  In the professional experience part, our team added some skills that are aligned with the position he is applying for.

When he was chosen for the real estate agent position, he sent us this thank you note:

“Kudos to the team for a job well done.  I am sincerely appreciative of the time and effort you gave on my resume.  You did not only help me land the job I had always been dreaming of but you also made me realize how important adding those specific keywords to my resume!  Cheers!

Manush’s story shows the importance of using powerful keywords to his resume in landing the job he wanted.

Module 2 Week 1 4.4.10

Navigation   » List of Schools  »  Trident University International  »  Computer Science  »  CSC 240 – Network Fundamentals  »  Summer 2021  »  Module 2 Week 1 4.4.10

Need help with your exam preparation?


Existing Quiz Clients Login here

Below are the questions for the exam with the choices of answers:

Question #1
Angela is the network administrator for a rapidly growing company with a 100BaseT network. Users have recently complained about slow file transfers. While checking network traffic, Angela discovers a high number of collisions.

Which connectivity device would best reduce the number of collisions and allow future growth?

A  Switch
B  Router
C  Hub
D  Bridge
E  Gateway
Question #2
You are creating an Ethernet network for your company. The shipping department is located in a different building that is located 150 meters from the main wiring closet. You connect a single Cat 6a cable to connect the wiring closet to the shipping building.

Which of the following should you include in your plan?

A  Half-duplex
B  Repeater
C  Shielded twisted pair
D  Spanning tree
Question #3
A user from the sales department calls to report that he is experiencing problems connecting to the sales file server. All users in the sales department connect to the sales server through a single Ethernet switch. No other users have reported problems connecting to the sales server.

Which of the following troubleshooting actions are you most likely to perform first?

A  Replace the Ethernet switch in the sales department.
B  Replace the network card in the sales server.
C  Reinstall the network card drivers on the sales server.
D  Replace the network card in the user’s computer.
Question #4
Upon conducting a visual inspection of the server room, you see that a switch displays LED collision lights that are continually lit. You check the LED on the corresponding workstation and see that it is flashing rapidly even though it is not sending or receiving network traffic at that time.

What is the cause of the network collisions?

A  Incorrect duplex settings
B  Faulty network card
C  Faulty switch
D  Adapter controller card failure
E  PCI slot failure
Question #5
You are moving a client to a new location within an Ethernet network. Previous to the move, the client system did not have difficulty accessing the network.

During the relocation, you attach patch cables from the client system to the wall jack and from the patch panel to the switch. Once connected, you do not get a link light on the network card or the switch. You swap out the cable running between the patch panel and the switch with a known working one, but you still cannot connect.

Which of the following might you suspect is the problem?

A  Failed switch
B  Server software configuration error
C  Failed network card
D  Failed patch cable between the client system and the wall jack
E  Incorrect duplex settings
F  Faulty termination
Question #6
You have just connected four new computer systems to an Ethernet switch using spare patch cables. After the installation, only three systems are able to access the network. You verify all client network settings and replace the network card in the failed system. The client is still unable to access the network.

Which of the following might you suspect is the real cause of the problem?

A  Failed switch
B  Failed patch cable
C  Incorrect routing table
D  Incorrect LAN protocol
E  Faulty IP stack
Question #7
During a network infrastructure upgrade, you have replaced two 10 Mbps hubs with switches and upgraded from Category 3 UTP cable to Category 5e. During the process, you accidentally cut the Cat 5e patch cable that stretches from the network printer to the upgraded switch.

What is the impact on the network?

A  All network nodes except the printer will be available.
B  All network nodes on the same subnet as the printer will be unavailable.
C  All network nodes authenticated by the same server as the printer will be unavailable.
D  All network nodes, including the printer, will be available.
E  All network nodes connected to the switch will be unavailable.
Question #8
You have a network connected using a full physical mesh topology. The link between device A and device B is broken.

Which of the following best describes what affect this will have on network communications?

A  Device A will not be able to communicate with any other device.
B  Device A will be able to communicate with all other devices.
C  No devices will be able to communicate with any other device.
D  Device A will be able to communicate with any device except for device B.
Question #9
You have a network connected using a physical star topology. One of the drop cables connecting a workstation has been removed.
Which of the following best describes what affect this will have on network communications?
A  All devices will be able to communicate, except the device connected with the drop cable .
B  No devices will be able to communicate.
C  Devices on one side of the missing cable will be able to communicate with each other; devices on the other side of the missing cable will not be able to communicate.
D  Devices on one side of the missing cable will be able to communicate with each other; devices on the other side of the missing cable will be able to communicate with each other.
E  All devices will be able to communicate.
Question #10
You have a network connected using a physical bus topology. One of the cables that connects a workstation to the bus breaks.

Which of the following best describes what effect this will have on network communications?

A  All devices except the device connected with the drop cable will be able to communicate.
B  Devices on one side of the break will be able to communicate with each other; devices on the other side of the break will be able to communicate with each other.
C  All devices will be able to communicate.
D  Devices on one side of the break will be able to communicate with each other; devices on the other side will not be able to communicate.
E  No devices will be able to communicate.
Question #11
Users are complaining that sometimes network communications are slow. You use a protocol analyzer and find that packets are being corrupted as they pass through a switch. You also notice that this only seems to happen when the elevator is running.

What should you do?

A  Install shielded cables near the elevator.
B  Add a dedicated A/C unit to the switch closet.
C  Install a dedicated power circuit for the switch.
D  Add a UPS system to the switch.
Play Video

“Many thanks for the killer business plan we worked on.  You guys are angels sent to me.  Congratulations to the team for a job well done. I hope you help more entrepreneurs like me grow their businesses.  I will surely bring some clients your way!”

Christian S.
SaaS Business Founder

“Thanks for all your help in bringing my website back to life. You are life savers.  With your help, I now have a more thorough understanding of my target audience.  I wish I had met your earlier, I could have saved tons of work hours.”

Tyra
Blogger

“We can never be thankful enough iwritegigs.com for helping us with our business.  We have been hesitating for years hiring a professional writer thinking it was only an extra cost to our business.  It has been a pleasure working with you.” 

Linda
Start Up Founder

“Kudos to the team for a job well done.  I am sincerely appreciative of the time and effort you gave on my resume.  You did not only help me land the job I had always been dreaming of but you also made me realize how important adding those specific keywords to my resume!  Cheers!

Manush
Fresh Graduate
We accept payment

Terms of Service
Copyright © 2021 iWriteGigs
ElitePro Writing Business Solutions LLC

30 N Gould St Ste R, Sheridan, WY 82801 

Call Us at 1-(323) 410-1787
Send us sms at 1-(323) 410-1787

17 Mabini St. Barangay San Diego Zone 2 Tayabas City, Philippines